Matrox 4Sight User Manual page 35

Joining a domain in
Windows NT
Embedded
To join a domain in Windows NT Embedded, you must use
NTConfig. From the primary NTConfig interface, click on the
Network Settings..., button and then proceed according to the
following steps:
1. Click on the Join Domain button in the Network
Settings... dialog box.
2. Enter the domain name you would like to join.
3. Enter a user account name recognized by the primary
domain controller. This account name must be suitable so
that the domain controller can add your machine account
on the domain.
4. Enter the user account password that will be required.
5. When you leave NTConfig, you will be notified that you
must re-boot the unit for the new settings to take effect.
6. When you re-boot the Matrox 4Sight unit, you will be able
to choose a domain name in the logon box. Note that the
user account name and password must correspond to an
active user account on the domain at logon time.
You might also need to provide your domain user account with
administrative capabilities on the Matrox 4Sight unit. To do so:
1. Type 'Usrmgr' at the command prompt. The
User Manager dialog box appears.
2. In the Groups selection box, double-click on
Administrators. The Local Group Properties dialog
box appears.
3. Click on the Add button to display the user accounts for the
selected domain you have joined.
4. Select and add your user account to the Administrators
list. You will now have administrative privileges on the local
Matrox 4Sight unit when you log into the domain.
LAN options 35