User Manual of Network PTZ Camera
2.
Click the PTZ control buttons to find a position as the initial position of the camera; you can
also call a defined preset and set it as the initial position of the camera.
3.
Click Set to save the position.
Call/delete an Initial Position:
You can click
to call the initial position. You can click
restore the factory default initial position.
5.4.4 Configuring Park Actions
Purpose:
This feature allows the camera to start a predefined park action automatically after a period of
inactivity (park time).
Scheduled Tasks function is prior to Park Action function. When these two functions are set
at the same time, only the Scheduled Tasks function takes effect.
Park function varies depending on different camera models.
Steps:
1. Enter Park Action settings interface:
Configuration > PTZ > Park Action
© Hikvision
Figure 5-24 PTZ Configuration
to delete the initial position and
50