User Manual of Network PTZ Camera
Steps:
1. Enter the authentication configuration interface:
Configuration> System> Security > Authentication
2. Select the authentication type. Digest is the recommended safer authentication way.
3. Click
Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
2. Check Enable IP Address Filter.
3. Select the type of IP Address Filter in the dropdown list, Forbidden and Allowed are
selectable.
4. Set the IP Address Filter list.
Add an IP Address
Steps:
(1) Click Add to add an IP.
(2) Input the IP Adreess.
© Hikvision
to save the settings.
Figure 6-40 IP Address Filter
87