HIKVISION PanoVu Mini Series User Manual page 83

User Manual of Network PTZ Camera
 Manual:
In Manual mode, you need to use
Day/Night Switch

Day/Night Switch
The Day/Night Switch mode can be set to Auto, Day, Night and Scheduled-Switch.
This function varies depending on the models of camera.
 Auto:
In Auto mode, the day mode and night mode can switch automatically according to the
light condition of environment.
 Day:
In Day mode, the camera displays color image. It is used for normal lighting conditions.
 Night:
In Night mode, the image is black and white. Night mode can increase the sensitivity in low
light conditions.
 Scheduled-Switch:
In Schedule mode, you can set the time schedule for day mode as shown in Figure 6-23.
The rest time out of the schedule is for night mode.
Backlight Settings

BLC (Back Light Compensation)
If there's a bright backlight, the subject in front of the backlight appears silhouetted or dark.
Enabling BLC (back light compensation) function can correct the exposure of the subject. But the
backlight environment is washed out to white.

WDR (Wide Dynamic Range)
The wide dynamic range (WDR) function helps the camera provide clear images even under back
light circumstances. When there are both very bright and very dark areas simultaneously in the
field of view, WDR balances the brightness level of the whole image and provide clear images
with details.
You can enable or disable the WDR function. The wide dynamic level ranges from 0 to 100.
© Hikvision
on the control panel to focus manually.
Figure 6-22 Auto Mode Sensitivity
Figure 6-23 Day Night Schedule
75