HIKVISION PanoVu Mini Series User Manual page 60

User Manual of Network PTZ Camera
2. Click the PTZ control buttons to find the area you want to set the privacy mask.
3. Click ; drag the mouse in the live video window to draw the area.
4. You can drag the corners of the red rectangle area to draw a polygon mask.
5. Click to finish drawing or click
saving them.
6. Click to save the privacy mask, and it will be listed in the Privacy Mask List area; set
the value of Active Zoom Ratio on your demand, and then the mask will only appear when
the zoom ratio is greater than the predefined value.
7. Check Enable Privacy Mask to enable this function.
8. Click Save to save the settings.
© Hikvision
Figure 5-26 Privacy Mask
to clear all of the areas you set without
Figure 5-27 Privacy Mask List
52