Configuring Alarm Output - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera

5.2.4 Configuring Alarm Output

Note:
This function varies depending on different camera models.
Steps:
1. Enter the Alarm Output settings interface:
Configuration> Event > Basic Event > Alarm Output
2. Select one alarm output channel in the Alarm Output dropdown list.
3. Set a name in
(optional).
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The
delay time refers to the time duration that the alarm output remains in effect after alarm
occurs.
5. Click
schedule configuration is the same as the setting of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection.
© Hikvision
Figure 5-16 Linkage Method
tab to enter the arming schedule setting interface. The arming
40
for the alarm output