HIKVISION PanoVu Mini Series User Manual page 51

User Manual of Network PTZ Camera
2. Check Audio Loss Detection to enable the audio input exception detection.
3. Check Sudden Increase of Sound Intensity Detection to enable the sudden rise detection.
 Sensitivity: Range [1-100], the smaller the value the more severe the sound change will
trigger the detection.
 Sound Intensity Threshold: Range [1-100], it can filter the sound in the environment, the
louder the environment sound, the higher the value should be. You can adjust it according
to the actual environment.
4. Check Sudden Decrease of Sound Intensity Detection to enable the sudden drop detection.
 Sensitivity: Range [1-100], the smaller the value the more severe the sound change will
trigger the detection.
5. Click
schedule configuration is the same as the settings of the arming schedule for motion
detection. Refer to Section 5.2.1 Configuring Motion Detection.
6. Click
Notify Surveillance Center, Send Email, and Trigger Recording are selectable. Refer to Section
5.2.1 Configuring Motion Detection.
7. Click
© Hikvision
Figure 5-19 Audio Exception Detection
tab to enter the arming schedule setting interface. The time
tab to select the linkage method taken for the audio input exception,
to save the settings.
43