User Manual of Network PTZ Camera
2. Check Enable DST to enable the DST function.
3. Set the date of the DST period.
4. Click
6.4.2 Maintenance
Upgrade & Maintenance
Rebooting the Camera
Steps:
1.
Enter Maintenance interface:
2.
Configuration > System > Maintenance > Upgrade & Maintenance:
3.
Click
Restoring Default Settings
Steps:
1.
Enter Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance:
2. Click
Clicking
address and user information. Use this button with caution.
Exporting Configuration File
Steps:
1.
Enter Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
2.
Click Device Parameters and set the encryption password to export the current
configuration file.
3.
Set the saving path to save the configuration file in local storage.
4.
Click Diagnose Information to download the log and system information.
Importing Configuration File
1.
Enter Maintenance interface:
Configuration > System > Maintenance > Upgrade & Maintenance
© Hikvision
to save the settings.
to reboot the network camera.
or
restores all the parameters to default settings including the IP
Figure 6-38 Restore Default Settings
to restore the default settings.
84