HIKVISION PanoVu Mini Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. PanoVu Mini
  6. Quick start manual
HIKVISION PanoVu Mini Quick Start Manual

HIKVISION PanoVu Mini Quick Start Manual

Network ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network PTZ Camera·Quick Start Guide
PanoVu Mini
Network PTZ Camera
Quick Start Guide
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PanoVu Mini and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION PanoVu Mini

Summary of Contents for HIKVISION PanoVu Mini

  • Page 1 Network PTZ Camera·Quick Start Guide PanoVu Mini Network PTZ Camera Quick Start Guide...
  • Page 2 Manual. About this Manual This Manual is applicable to PanoVu Mini Network PTZ Camera. The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only.
  • Page 3 PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;...
  • Page 4 Network PTZ Camera·Quick Start Guide IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. 0504111080130...
  • Page 5 Network PTZ Camera·Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 Network PTZ Camera·Quick Start Guide 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 Network PTZ Camera·Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 8 Network PTZ Camera·Quick Start Guide  Make sure that the power has been disconnected before you wire, install or dismantle the PTZ camera.  When the camera is mounted on wall or ceiling, the device shall be firmly fixed.  If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then contact the service center.
  • Page 9 Network PTZ Camera·Quick Start Guide camera will not be used for an extended period, replace the lens cap to protect the sensor from dirt.  Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.

  • Page 10: Table Of Contents

    Network PTZ Camera·Quick Start Guide Table of Contents 1 Overview ..................1 1.1 Introduction ................1 1.1.1 Overview of Type I Camera ..........1 1.1.2 Overview of Type II Camera ..........2 1.1.3 Overview of Type III Camera ..........3 1.1.4 Overview of Type IV Camera ..........
  • Page 11 Network PTZ Camera·Quick Start Guide 3.3 Modifying the IP Address ............26 4 Accessing via Web Browser ............29 5 Operating via Hik-Connect App ............ 32 5.1 Enable Hik-Connect Service on Camera ........32 5.1.1 Enable Hik-Connect Service via SADP Software ....32 5.1.2 Enable Hik-Connect Service via Web Browser ....

  • Page 12: Overview

    Network PTZ Camera·Quick Start Guide 1 Overview 1.1 Introduction PanoVu Mini Series Network PTZ Camera has five types:  Type I: Indoor Camera with 3+1 Lenses  Type II: Indoor Camera with 1+1 Lenses  Type III: Indoor Camera with 3+0 Lenses ...

  • Page 13: Overview Of Type Ii Camera

    Network PTZ Camera·Quick Start Guide Memory Card Slot Network Interface (PoE) Reset Button Power Supply (12 VDC) Audio Output Audio Input Figure 1-2 Interfaces of Type I Camera 1.1.2 Overview of Type II Camera Cover Lens Figure 1-3 Overview of Type II Camera...

  • Page 14: Overview Of Type Iii Camera

    Network PTZ Camera·Quick Start Guide Memory Card Slot Network Interface (PoE) Reset Button Power Supply (12 VDC) Audio Output Audio Input Figure 1-4 Interfaces of Type II Camera 1.1.3 Overview of Type III Camera Three Lenses Figure 1-5 Overview of Type III Camera Memory Card Slot Network Interface (PoE) Reset Button...

  • Page 15: Overview Of Type Iv Camera

    Network PTZ Camera·Quick Start Guide Note: Press RESET when the camera is powering on or rebooting to restore the default settings, including the user name, password, IP address, and port No., etc. 1.1.4 Overview of Type IV Camera Figure 1-7 Overview of Type IV Camera Network Interface Audio Interface Alarm Interface...

  • Page 16: Overview Of Type V Camera

    Network PTZ Camera·Quick Start Guide 1.1.5 Overview of Type V Camera Figure 1-9 Overview of Type V Camera Note: Cable interfaces of Type V camera are the same as cable interfaces of Type IV camera. Refer to Figure 1-8.

  • Page 17: Installation

    Network PTZ Camera·Quick Start Guide 2 Installation Before you start: Check the package contents and make sure that the device in the package is in good condition and all the assembly parts are included. Note: Do not power the camera up until the installation is finished. To ensure the safety of personnel and equipment, all the installation steps should be done with power supply off.

  • Page 18: Ceiling Mounting

    Network PTZ Camera·Quick Start Guide OPEN Figure 2-1 Remove the Installation Plate Insert the memory card into the memory card slot as shown in Figure 2-2. Figure 2-2 Insert the Memory Card 2.1.2 Ceiling Mounting Before you start:  The thickness of the ceiling shall be no less than 5 mm. ...
  • Page 19 Network PTZ Camera·Quick Start Guide 1) Rotate the installation plate anticlockwise to separate it from the camera. 2) Drill three screw holes on the ceiling according to the installation plate as shown in Figure 2-3. Screw Holes Front Figure 2-3 Drill Screw Holes 3) Insert three expansion screws into the screw holes.
  • Page 20 Network PTZ Camera·Quick Start Guide Cables of the network PTZ camera can be routed either from top or side of the camera back box, as shown in Figure 2-5 and Figure 2-6. Figure 2-5 Route the Cables from Top Figure 2-6 Route the Cables from Side Install the camera.

  • Page 21: Wall Mounting

    Network PTZ Camera·Quick Start Guide Note: Align the FRONT label on the camera with the FRONT label on the installation plate. 2) Remove the protective films after installation. Note: Do not touch the bubble directly with your hands. Otherwise, the image may blur. 2.1.3 Wall Mounting Before you start: ...
  • Page 22 Network PTZ Camera·Quick Start Guide Figure 2-7 Install the Bracket Seat Install the wall mounting bracket. 1) Route the cables through the bracket. 2) Align the bracket with the bracket seat installed on the wall, and push the bracket according to the direction as shown in Figure 2-8.

  • Page 23: Pendant Mounting

    Network PTZ Camera·Quick Start Guide Install the camera. 1) Rotate the installation plate anticlockwise to separate it from the camera. 2) Connect the cables to the corresponding interfaces on the camera. 3) Align the camera with the bracket, and rotate the camera clockwise to fix the camera on the bracket.
  • Page 24 Network PTZ Camera·Quick Start Guide Install the bracket. Fix the pendant bracket on the place where you want to install the camera as shown in Figure 2-10. FRONT Figure 2-10 Install the Bracket Route the cables, and connect the cables to the corresponding interfaces on the camera as shown in Figure 2-11.

  • Page 25: Installing Type Ii Camera

    Network PTZ Camera·Quick Start Guide 1) Align the camera with the installation plate on the pendant mounting bracket, and rotate the camera clockwise to fix the camera on the installation plate. 2) Remove the protective films after installation. Note: Do not touch the bubble directly with your hands. Otherwise, the image may blur.
  • Page 26 Network PTZ Camera·Quick Start Guide Unscrew the two screws on the memory card slot cover on the top of the camera, as shown in Figure 2-12, and remove the memory card slot. Two Screws Memory Card Slot Figure 2-12 Unscrew the Screws Insert the memory card into the memory card slot, as shown in Figure 2-13.

  • Page 27: Wall Mounting

    Network PTZ Camera·Quick Start Guide 2.4.2 Wall Mounting Before you start:  You need to prepare the wall mounting bracket first.  For cement wall, you need to use the expansion bolt to fix the bracket.  For wooden wall, you can just use the self-tapping screw to fix the bracket.
  • Page 28 Network PTZ Camera·Quick Start Guide Install the camera. 1) Align the camera with the bracket, and push the camera into the bracket, as shown in Figure 2-15. Figure 2-15 Install the Camera 2) Rotate the camera anticlockwise, and tighten the two lock screws to fix the camera, as shown in Figure 2-16.

  • Page 29: Corner Mounting

    Network PTZ Camera·Quick Start Guide Note: Do not touch the bubble directly with your hands. Otherwise, the image may blur. 2.4.3 Corner Mounting Before you start: You need to prepare the corner mounting bracket and the wall mounting bracket first. Steps: Install the corner mounting bracket.

  • Page 30: Pendant Mounting

    Network PTZ Camera·Quick Start Guide Figure 2-18 Install the Camera 2.4.4 Pendant Mounting Pendant mounting for Type IV camera is similar to pendant mounting for Type I camera. Refer to section 2.1.4 Pendant Mounting. Figure 2-19 Pendant Mounting for Type IV Camera 2.4.5 Adjust the Surveillance Angle After installation, you can adjust the surveillance angle of the camera.
  • Page 31 Network PTZ Camera·Quick Start Guide Remove the bubble. 1) Rotate the white ring clockwise on the top of the camera, and remove the cover, as shown Figure 2-20. Cover White Ring Figure 2-20 Remove the Cover 2) Unscrew the four screws on the metal ring, as shown in Figure 2-21.

  • Page 32: Installing Type V Camera

    Network PTZ Camera·Quick Start Guide Bubble Hole Joint Metal Ring Figure 2-22 Remove the Metal Ring and the Bubble Adjust the horizontal position and the vertical direction for each camera. Camera Figure 2-23 Adjust the Surveillance Angle Install the bubble, metal ring, and cover back, and fix the cover. Note: The side of the metal ring marked with TOP should face upwards, and tighten the four screws to fix the metal ring.

  • Page 33: Setting The Ptz Camera Over The Lan

    Network PTZ Camera·Quick Start Guide 3 Setting the PTZ Camera over the LAN Notes:  You shall acknowledge that the use of the product with Internet access might be under network security risks. For avoidance of any network attacks and information leakage, strengthen your own protection.

  • Page 34: Activating The Camera

    Network PTZ Camera·Quick Start Guide 网络交换机 Network PTZ Camera Computer Figure 3-2 Connecting via a Switch or a Router 3.2 Activating the Camera Purpose: You are required to activate the camera first by setting a strong password for it before you can use the camera. Activation via web browser, activation via SADP, and activation via client software are supported.
  • Page 35 Network PTZ Camera·Quick Start Guide Input the IP address into the address bar of the web browser, and enter the activation interface. Notes:  The default IP address of the camera is 192.168.1.64.  The computer and the camera should belong to the same subnet.

  • Page 36: Activation Via Sadp Software

    Network PTZ Camera·Quick Start Guide Confirm the password. Click OK to activate the camera and enter the live view interface. 3.2.2 Activation via SADP Software SADP software is used for detecting the online device, activating the device, and resetting the password. Get the SADP software from the supplied disk or the official website, and install the SADP according to the prompts.

  • Page 37: Modifying The Ip Address

    Network PTZ Camera·Quick Start Guide Note: The SADP software supports activating the camera in batch. Refer to the user manual of SADP software for details. Create a password and input the password in the password field, and confirm the password. STRONG PASSWORD RECOMMENDED–...
  • Page 38 Network PTZ Camera·Quick Start Guide To view and configure the camera via LAN (Local Area Network), you need to connect the network camera in the same subnet with your Use the SADP software or client software to search and change the IP address of the device.
  • Page 39 Network PTZ Camera·Quick Start Guide Figure 3-5 Modify the IP Address Note: You can enable the Hik-Connect service for the device during activation. Refer to section 5.1 Enable Hik-Connect Service on Camera. Input the admin password and click Modify to activate your IP address modification.

  • Page 40: Accessing Via Web Browser

    Network PTZ Camera·Quick Start Guide 4 Accessing via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version/Vista/Win7/Server 2003/Server 2008 32bits CPU: Intel Pentium IV 3.0 GHz or higher RAM: 1G or higher Display: 1024 × 768 resolution or higher Web Browser: Internet Explorer 8 to 11, Google Chrome 31 to 44, and Mozilla Firefox 30 to 51 Steps:...
  • Page 41 Network PTZ Camera·Quick Start Guide Click Login. Figure 4-1 Login Interface Install the plug-in before viewing the live video and managing the network PTZ camera. Follow the installation prompts to install the plug-in. Note: You may have to close the web browser to finish the installation of the plug-in.
  • Page 42 Network PTZ Camera·Quick Start Guide Note: For detailed instructions of further configuration, refer to the user manual of the network camera.

  • Page 43: Operating Via Hik-Connect App

    Network PTZ Camera·Quick Start Guide 5 Operating via Hik-Connect App Purpose: Hik-Connect is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification and so 5.1 Enable Hik-Connect Service on Camera Purpose: Hik-Connect service should be enabled on your camera before using the service.

  • Page 44: Enable Hik-Connect Service Via Web Browser

    Network PTZ Camera·Quick Start Guide Figure 5-1 Verification Code Setting (SADP) Note: The verification code is required when you add the camera to Hik-Connect app. Click and read "Terms of Service" and "Privacy Policy". Confirm the settings. 5.1.2 Enable Hik-Connect Service via Web Browser Before you start: You need to activate the camera before enabling the service.

  • Page 45: Hik-Connect Setup

    Network PTZ Camera·Quick Start Guide Steps: Access the camera via web browser. Refer to chapter 4 Accessing via Web Browser. Enter platform access configuration interface: Configuration > Network > Advanced Settings > Platform Access Check Enable. Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
  • Page 46 Network PTZ Camera·Quick Start Guide You need to enable the Hik-Connect service on camera before adding it to your Hik-Connect account. Refer to section 5.1 Enable Hik-Connect Service on Camera. Steps: Use a network cable to connect the camera with a router if the camera does not support Wi-Fi.

  • Page 47: Initializing The Memory Card

    Network PTZ Camera·Quick Start Guide If the QR code is missing or too blur to be recognized, you can also add the camera by tapping the icon and inputting the camera's serial number. Input the verification code of your camera. Notes: ...
  • Page 48 Network PTZ Camera·Quick Start Guide UD08667B...

Table of Contents