Chapter 5 System Configuration; Storage Settings; Configuring Recording Schedule - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera

Chapter 5 System Configuration

5.1 Storage Settings

Before you start:
To configure record settings, make sure that you have the network storage device within the
network or the memory card inserted in your camera.

5.1.1 Configuring Recording Schedule

Purpose:
There are two kinds of recording for the camera: manual recording and scheduled recording. In
this section, you can follow the instructions to configure the scheduled recording. By default, the
record files of scheduled recording are stored in the memory card (if supported) or in the
network disk.
Steps:
1. Enter Record Schedule settings interface:
Configuration > Storage > Schedule Settings > Record Schedule
2. Select the camera channel to configure.
3. Check Enable to enable scheduled recording.
4. To set the advanced settings of the camera, click
interface.
© Hikvision
Figure 5-1 Recording Schedule Interface
27
to enter the advanced settings