User Manual of Network PTZ Camera
4. Edit a preset name by double clicking on the default name such as preset 1. (The pre-defined
presets are named already and not configurable. Refer to the user manual for detailed
function description.)
5. You can click
to delete the preset.
You can configure up to 300 presets.
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them but not
configure them.
Preset
Function
34
Back to origin
39
Day mode
40
Night mode
© Hikvision
Figure 4-7 Calling a Preset
Table 4-4 Special Presets
Preset
92
93
94
Figure 4-8 Special Preset
to call the preset.
Function
Set manual limits
Save manual limits
Remote reboot
23