Activating The Camera - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera

2.1.2 Activating the Camera

Purpose:
You are required to activate the camera first before you can use the camera.
Activation via web browser, activation via SADP, and activation via client software are supported.
 Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and enter the activation
interface.
The default IP address of the camera is 192.168.1.64.
3. Create a password and input the password into the password field.

For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.
© Hikvision
Figure 2-2 Connecting via a Switch or a Router
Figure 2-3 Activation Interface (Web)
4