HIKVISION PanoVu Mini Series User Manual page 44

User Manual of Network PTZ Camera
Note:
To send the Email when an event occurs, you need to refer to Section Configuring FTP
Settings
Purpose:
You can set a FTP server and configure the following parameters for uploading captured pictures.
Note:
FTP function is invalid when the sub-stream is enabled
Steps:
1. Enter the FTP settings interface:
Configuration > Network > Advanced Settings > FTP
2. Configure the FTP settings, including server address, port, user name, password, directory,
and upload type.
The server address supports both the domain name and IP address formats.

For your privacy and to better protect your system against security risks, we strongly
recommend the use of strong passwords for all functions and network devices. The
password should be something of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers and special characters) in order
to increase the security of your product.

Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.

Setting the directory in FTP server for saving files:
In the Directory Structure field, you can select the root directory, parent directory and
child directory.
 Root directory: The files will be saved in the root of FTP server.
 Parent directory: The files will be saved in a folder in FTP server. The name of folder can
be defined as shown in Figure 6-9.
© Hikvision
Figure 5-11 FTP Settings
36