Configuring Pppoe Settings - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera
3. Select DDNS Type. Two DDNS types are selectable: DynDNS and NO-IP.
 DynDNS:
Steps:
(1) Enter Server Address of DynDNS (e.g. members.dyndns.org).
(2) In the Domain text field, input the domain name obtained from the DynDNS website.
(3) Input the Port of DynDNS server.
(4) Input the User Name and Password registered on the DynDNS website.
(5) Click
 NO-IP:
Steps:
(1) Enter Server Address of NO-IP.
(2) In the Domain text field, input the domain name obtained from the NO-IP website.
(3) Input the Port of NO-IP server.
(4) Input the User Name and Password registered on the NO-IP website.
(5) Click

Configuring PPPoE Settings

Purpose:
If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet
(PPPoE) function.
Steps:
1. Enter PPPoE settings interface:
Configuration > Network > Basic Settings > PPPoE
© Hikvision
to save the settings.
Figure 6-3 DynDNS Settings
to save the settings.
Figure 6-4 PPPoE Settings
58