Configuring Image Parameters Switch - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera

6.3.5 Configuring Image Parameters Switch

This function varies depending on different camera models
Purpose:
You can configure Link to Preset or Scheduled-Switch in this interface. Link to Preset: Set the
time period and linked scene for the preset and check the corresponding checkbox to go to the
linked scene in the configured time period. Scheduled-Switch: Set the time period and linked
scene and it will go to the linked scene in the configured time period when you check the
corresponding checkbox.
Steps:
1. Enter Image Parameters Switch interface:
Configuration > Image > Image Parameters Switch
2. Check Link to Preset or Scheduled-Switch to enable the function. (Only one function can be
enabled in the same time.)
3. When you enable the function of Link to Preset, select one preset from the dropdown list,
check the corresponding checkbox, set the time period and the linked scene for the selected
preset. (Up to 4 periods can be configured for one preset.)
4. When you enable the function of Scheduled-Switch, check the corresponding checkbox, set
the time period and the linked scene.
5. Click
The two functions are not enabled by default.
© Hikvision
Figure 6-29 Link to Preset
Figure 6-30 Linked Scene
Figure 6-31 Schedule-Switch
to save the settings.
80