Configuring Video And Audio Settings; Configuring Video Settings - HIKVISION PanoVu Mini Series User Manual

User Manual of Network PTZ Camera
3. Check Enable IEEE 802.1X to enable it.
4. Configure the 802.1X settings, including user name and password.
The EAP-MD5 version must be identical with that of the router or the switch.
5. Click
The camera reboots when you save the settings.
6. After the configuration, connect the camera to the protected network.

6.2 Configuring Video and Audio Settings

6.2.1 Configuring Video Settings

Steps:
1. Enter Video settings interface:
Configuration > Video/Audio > Video
2. Select the camera channel to configure.
3. Select the Stream Type of the camera to main stream (normal) or sub-stream. The main
stream is usually for recording and live viewing with good bandwidth, and the sub-stream can
be used for live viewing when the bandwidth is limited. Refer to the Section 4.1 Configuring
Local Parameters for switching the main stream and sub-stream for live viewing.
Sub-stream is not supported by certain camera models.
© Hikvision
to finish the settings.
Figure 6-18 Configure Video Settings
69