User Manual of Network PTZ Camera
5.1.2 Configuring Capture Schedule
Purpose:
You can configure the scheduled snapshot and event-triggered snapshot. The captured picture
can be stored in the local storage or network storage.
Note:
FTP is invalid when sub-stream is enabled.
Steps:
1.
Enter the Snapshot settings interface:
Configuration > Storage > Storage Settings > Capture
2.
Click Capture Schedule to enter the capture schedule interface.
3.
Select the timeline of a certain day, and drag the left button of the mouse to set the capture
schedule (the start time and end time of the recording task).
4.
After you set the scheduled task, you can click
(optional).
5.
After setting the capture schedule, you can click a capture segment to display the segment
capture settings interface to edit the segment capture parameters. (optional)
6.
Click Advanced to enter the advanced setting interface. You can select the stream type of
the capture.
© Hikvision
Figure 5-3 Snapshot Settings
Figure 5-4 Segment Snapshot Settings
and copy the task to other days
29