User Manual of Network PTZ Camera
6.2.4 Display Info. on Stream
Check Enable Dual-VCA, and the information of the objects (e.g. human, vehicle, etc.) will be
marked in the video stream. Then, you can set rules on the connected rear-end device to detect
the events including line crossing, intrusion, etc.
6.3 Configuring Image Settings
On the event configuration page, click
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on different camera models.
6.3.1 Configuring Display Settings
Purpose:
Configure the image adjustment, exposure settings, focus, day/night switch, backlight settings,
white balance, image enhancement, video adjustment, and other parameters in display settings.
The parameters in Display Settings interface vary depending on different camera models.
You can double click the live view to enter full screen mode and double click it again to exit.
Steps:
1. Enter Display Settings interface:
Configuration > Image> Display Settings
2. Select the camera channel to configure.
3. You can select the Scene from the dropdown list with different predefined image parameters.
4. Set the image parameters of the camera.
© Hikvision
to show the PTZ control panel or click
73
to hide it.