Terminal Procedure Charts - Garmin CIRRUS PERSPECTIVE SR22T Reference Manual

Adjusting the EVS Display
1) Turn the large FMS Knob to select the AUX Page Group.
2) Turn the small FMS Knob to select the VIDEO Page.
3) Press the SETUP Softkey. The EVS display adjustment softkeys are now
displayed.
4) Pressing the CNTRST - and CNTRST + Softkeys adjust display contrast in
five percent increments from 0 to 100%.
5) Pressing the BRIGHT - and BRIGHT + Softkeys adjust display brightness in
five percent increments from 0 to 100%.
6) Pressing the SAT - and SAT + Softkeys adjust display saturation in five
percent increments from 0 to 100%.
7) Pressing the RESET Softkey returns all video adjustments options to the
default settings
8) Press the BACK Softkey to return to the previous softkey level, or after
45 seconds of softkey inactivity, the system reverts to the top level AUX -
VIDEO Page softkeys.

TERMINAL PROCEDURE CHARTS

NOTE: With the availability of SafeTaxi®, ChartView, or FliteCharts®, it may
be necessary to carry another source of charts on-board the aircraft.
SafeTaxi
®
SafeTaxi ® is an enhanced feature that gives greater map detail as the map range
is adjusted in on the airport. The airport display on the map reveals runways with
numbers, taxiways identifiers, and airport landmarks including ramps, buildings,
control towers, and other prominent features. Resolution is greater at lower map
ranges. The aircraft symbol provides situational awareness while taxiing.
Selecting the DCLTR Softkey cycles through the different declutter levels. DCLTR
shows all map detail. DCLTR-1 removes taxiway markings and airport identification
labels. DCLTR-2 removes VOR station ID, the VOR symbol, and intersection names
if within the airport plan view. DCLTR-3 removes the airport runway layout, unless
the airport in view is part of an active flight plan.
190-00821-09 Rev. A
Cirrus Perspective ™ by Garmin – Cockpit Reference Guide for the SR20/SR22/SR22T
Additional Features
83