Sitop Ups1600 Parameters In The Opc Ua Client; Introduction; Actualbatterystate - Siemens SITOP UPS1600 Manual

Engineering and remote access
3.8 OPC UA server
3.8.6

SITOP UPS1600 parameters in the OPC UA client

3.8.6.1

Introduction

The OPC UA client uses the following symbols:
Information on the selected object is displayed in area "Attributes". Relationships to other
objects are displayed in area "References".
A dialog is displayed when calling a method. "InputArguments" and "OutputArguments" can
be entered here.
Values that can be changed (e.g. IP addresses or path data) can be directly edited in area
"Attributes".
3.8.6.2

ActualBatteryState

Display name
BatteryChange
Recommended
BatteryCharge
BatteryChargeVoltage
168
Object
Object (supported modules)
Method
Variable with other attributes (EURange, EngineeringUnits, EnumStrings)
Variable
Data type Definition
Boolean PropertyType
Byte AnalogItemType Battery charge level in percent
Float AnalogItemType Voltage used to charge battery during the constant charging
Description
Battery capacity is insufficient to achieve the specified buffer
time.
phase.
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76