Siemens SITOP UPS1600 Manual page 177

ActualChargingState
Display name
ChargeCurrent
ChargeEndVoltage
ChargeTotalCurrent
ActualState
Display name
ModuleCalculated
Capacity
ModuleCalculated
Health
ModuleCapacity
ModuleChange
Recommended
ModuleCompound
ModuleConnection
Fault
ModuleManufactoring
Date
ModuleMax
Temperature
ModuleMin
Temperature
ModuleStandbyTime
ModuleStateLed
ModuleTemperature
ModuleTotalCulled
Current
Alarm
Display name
AlarmBatteryChange
Canceled
AlarmBatteryChange
FInished
AlarmBatteryChange
Started
AlarmBattery
CommunicationFault
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Data type Definition
Float AnalogItemType Actual charging current used to charge battery.
Float AnalogItemType Battery voltage when charging changes to trickle charging.
Float AnalogItemType Battery-specific data: Total charge to the battery during its
Data type Definition
Float AnalogItemType Available battery capacity
Byte AnalogItemType State of health (SoS) as percentage of the rated capacity
Float AnalogItemType Capacity
Boolean PropertyType
Enumeration MultiState
DiscreteType
Boolean PropertyType
Date PropertyType
Sbyte AnalogItemType Maximum specified operating temperature of the battery.
Sbyte AnalogItemType Minimum specified operating temperature of the battery.
UInt32 AnalogItemType Battery-specific data: Time for which battery was connected
Object Sitop_1600_
LedType
Sbyte AnalogItemType Battery temperature
Float AnalogItemType Battery-specific data: Time for which battery was connected
Data type Definition
Boolean PropertyType
Boolean PropertyType
Boolean PropertyType
Boolean PropertyType
Description
Battery is charged 100 %.
service life
Description
Battery capacity is insufficient to achieve the specified buffer
time.
Connected device
Connection to battery interrupted - check connection and
fuse
Manufacturing date of the battery modules.
but no power was consumed.
ModuleStateLed
and power was consumed.
Description
Battery replacement canceled - battery parameters are not
reset
Battery replacement finished - counters have been reset
Battery replacement started by user
Communication with formerly known battery is no longer
possible - check communication
Engineering and remote access
3.8 OPC UA server
177