Siemens SITOP UPS1600 Manual page 98

Hide thumbs Also See for SITOP UPS1600:
Table of Contents

Advertisement

Engineering and remote access
3.5 Cyclic and acyclic data
Data
Batt 6: Stop buffering voltage
[0.01 V]
Batt 6: Battery type
Batt 6: Minimal temperature [1 °C]
Batt 6: Maximal temperature [1 °C]
Fill byte(s)
Batt 6: Order number
Batt 6: Serial number
Batt 6: Manufacturing date
Batt 6: Version number
0x0006: Device information parameters (reading)
Data
HW revision
SW revision
Boot loader version
Max output current [1 A]
Fill byte(s)
MLFB/Order number
Serial number
Device name
Version number
0x0007: Hardware setting parameters (reading)
Data
Buffer time [1 s]
Buffer threshold [0.01 V]
Buffering allowed
Enable reset
98
Description
Stop buffering voltage: Buffer operation is exited if the battery
voltage is below this value.
Battery type
Lowest specified operating temperature of the battery module
being used SITOP UPS1100.
Highest specified operating temperature of the battery module
being used SITOP UPS1100.
-
Order number (Article number).
Serial number
Manufacturing date
Version number
Description
Hardware version
Software release
Boot loader version
Maximum output current
-
MLFB/order number (Article number)
Serial number
Device name
Version number
Description
Buffer time: After the selected buffer time has expired, the
SITOP UPS1600 switches off the load output. The actual buffer
time that can be achieved depends on the connected loads and
energy storage devices.
Connection threshold: Switching voltage for buffering. Buffering is
active below this value.
Activate or deactivate buffer operation. The setting is only accept-
ed in operating mode Remote Enable (REN) of the
SITOP UPS1600.
Enable reset: If, during buffer operation, the input voltage be-
comes available again, then the output of the SITOP UPS1600 is
switched off for a selectable time in order to reset connected
loads.
Data type
Unsigned16
Unsigned8
Signed8
Signed8
3 x Unsigned8
VisibleString(30)
VisibleString(30)
VisibleString(30)
VisibleString(50)
Data type
Unsigned16
Unsigned16
Unsigned16
Unsigned8
Unsigned8
VisibleString(30)
VisibleString(30)
VisibleString(30)
VisibleString(50)
Data type
Unsigned16
Unsigned16
Unsigned8
Unsigned8
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents