Web Server - Siemens SITOP UPS1600 Manual

Engineering and remote access

3.7 Web server

6. To assign a fixed IP address: Activate checkbox "Fixed IP address" and enter the
appropriate parameters in the editor area.
7. Load the data to the device, see Loading the configuration (Page 141).
3.7.8.2 Web server
Here, you can make general settings and define which actions should be automatically
executed.
Settings
Parameters
Activate web server on this module
Permit access only with HTTPS
Log off automatically after 15 minutes
Update interval
● Activate web server on this module
Define as to whether the device may be accessed via the web server.
● Permit access only with HTTPS
Define whether access is only permissible via HTTPS.
148
Value range
Yes/no
Yes/no
Yes/no
0 / 5 s / 10 s / 20 s / 30
s / 60 s
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Default setting
No
Yes
No
0 = no automatic up-
date