Reading And Writing Data Sets - Siemens SITOP UPS1600 Manual

Slot
3.5.2

Reading and writing data sets

An overview of all data sets, which are communicated between the SITOP UPS1600 and the
PROFINET IO-Controller is provided in the following table. Here, a distinction is made
between the following data sets:
● Reading data sets: Data which is sent from the SITOP UPS1600 to the
PROFINET IO-Controller .
● Writing data sets: Data which is sent from the PROFINET IO-Controller to the
SITOP UPS1600.
Index Slot Subslot Data set
0x0001 0 1
0x0002 0 1
0x0003 0 1
0x0004 0 1
0x0005 0 1
0x0006 0 1
0x0007 0 1
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Subslot Data
Battery change
recommended
Not used
Battery charge level
Battery connection
maintenance
from V2.1
Type
Buffering parameters Reading /
writing
Battery parameters Reading /
writing
Charging parameters Reading /
writing
Reset parameters Reading /
writing
Battery information Reading
parameters
Device information Reading
Parameters
Hardware settings Reading
parameters
Engineering and remote access
Description
Battery replacement recommend-
ed: Battery capacity is insufficient
to achieve the specified buffer
time:
0: no
•
255: yes
•
-
Battery charge level in %:
0-100: 0-100%
•
255: unknown battery
•
Connection to the battery inter-
rupted: Check the connection and
fuse:
0: no maintenance required
•
255: maintenance required
•
Description
Buffer parameters.
Parameters of the connected battery
modules
Charge parameters of the connected
battery modules
Reset parameters.
Information about the connected battery
modules SITOP UPS1100. This infor-
mation is available via the link "Energy
Storage".
Information about the
SITOP UPS1600.
Hardware settings of the
SITOP UPS1600 (settings that were
made at the front of the device).
3.5 Cyclic and acyclic data
Data size
Unsigned8
Unsigned8
Unsigned8
Unsigned8
Data size
14 bytes
5 bytes
4 bytes
1 byte
1024 bytes
148 bytes
8 bytes
91