Mounting Position, Mounting Clearances; Sitop Ups1600; Standard Mounting Position - Siemens SITOP UPS1600 Manual

Mounting position, mounting clearances

6.1

SITOP UPS1600

6.1.1

Standard mounting position

The device is mounted on standard mounting rails EN 60715 35×7.5/15. The device must be
mounted vertically in such a way that the input terminals and the output terminals are at the
bottom to ensure correct cooling.
A clearance of at least 50 mm should be maintained above and below the device.
No clearance is required at the side.
Output current as a function of the ambient temperature
Figure 6-1
Figure 6-2
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
6EP4134-3AB00-... Output current in the standard mounting position
6EP4136-3AB00-... Output current in the standard mounting position
6
193