Device Configuration - Siemens SITOP UPS1600 Manual

Note
For security reasons, when installing for the first time, the default password should be
changed. Further, it is recommended that passwords are regularly changed.
Procedure for setting up a guest access
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Improved PN security".
3. Select entry "User administration".
4. Enter a password in the editor area under "guest" and select the individual access rights
for guest access.
5. Enter the password again under "Confirm password".
6. Load the data to the device.
Procedure for setting up a user account
1. Select the "Hardware configuration" menu.
2. Select submenu "General > Improved PN security".
3. Select entry "User administration".
4. In the editor area, click on "Add new user" and in this line enter the name for the new
user.
5. Select the individual access rights for the new user.
6. Enter a password for the new user - and repeat this to confirm the password.
7. Load the data to the device.
3.7.8.7

Device configuration

You set the parameters for basic devices and energy storage devices under menu item "HW
Configuration > Device configuration".
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Engineering and remote access
3.7 Web server
153