Sitop Ups1600 Parameters In The Opc Ua Client; Introduction - Siemens SITOP UPS1600 Equipment Manual

Engineering and remote access
3.10 OPC UA server
The result of the method call is displayed in a dialog.
3.10.6

SITOP UPS1600 parameters in the OPC UA client

3.10.6.1

Introduction

The OPC UA client uses the following symbols:
Information on the selected object is displayed in area "Attributes". Relationships to other
objects are displayed in area "References".
A dialog is displayed when calling a method. "InputArguments" and "OutputArguments" can
be entered here.
Values that can be changed (e.g. IP addresses or path data) can be directly edited in area
"Attributes".
166
Object
Object (supported modules)
Method
Variable with other attributes (EURange, EngineeringUnits, EnumStrings)
Variable
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76