Actualbufferstate; Actualchargingstate; Actualstate - Siemens SITOP UPS1600 Manual

Display name
BatteryConnection
Fault
BatteryCount
BatteryVoltage
3.8.6.3

ActualBufferState

Display name
BufferMode
BufferReady
BufferRemainingTime
3.8.6.4

ActualChargingState

Display name
ChargeMeasured
Current
ChargeSufficient
3.8.6.5

ActualState

Display name
DeviceAlarmLed
DeviceBatteryFaultLed Object
DeviceBattery
Over85Led
DeviceCalculated
Capacity
DeviceCalculated
Health
DeviceInputCurrent
DeviceInputVoltage
DeviceInputVoltageOK Boolean
DeviceLoadCurrent
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76
Data type Definition
Boolean PropertyType
Byte PropertyType
Float AnalogItemType Current battery voltage
Data type Definition
Enumeration MultiState
DiscreteType
Boolean PropertyType
UInt32 AnalogItemType Estimated remaining buffer time. The remaining buffer time
Data type Definition
Float AnalogItemType Measured battery charge current
Boolean PropertyType
Data type Definition
Object Sitop_1600_
LedType
Sitop_1600_
LedType
Object Sitop_1600_
LedType
Float AnalogItemType Available battery capacity
Byte AnalogItemType State of health (SoS) as percentage of the rated capacity
Float AnalogItemType Measured input current of SITOP UPS1600
Float AnalogItemType Input voltage
PropertyType
Float AnalogItemType Measured output current of SITOP UPS1600
Description
The connection to the battery has been interrupted or has a
high impedance.
Number of connected batteries. Only coded batteries are
counted.
Description
Indicates buffer mode
Sufficient buffer readiness
is calculated using the current battery charge level and
average current over 10 minutes.
Description
When this flag is set, the required charge level has been
achieved
Description
Status of LED "Alarm"
Status of LED "BatteryFault"
Status of LED "BatteryOver85"
Input voltage has exceeded the configured threshold volt-
age. Connected devices are powered with the input supply.
Engineering and remote access
3.8 OPC UA server
169