Buttons And Selector Switches; Sitop Select - Siemens SITOP Manual

2.5

Buttons and selector switches

2.5.1

SITOP select

Figure 2-6
The reset button
1. resets all outputs automatically switched off due to an overload condition (see Chapter
Electronic overload shutdown and reset (Page 21)).
2. is used to program the sequential switch-on delay (see Chapter Setting the switch-on
delay time (Page 26).
Selectivity modules
Manual, 01.2017, C98130-A7579-A1-2-7629
Reset button SITOP select
⑥
for the SITOP select selectivity module has the following two functions:
Description, device design, dimension drawing
2.5 Buttons and selector switches
19