Siemens SITOP UPS1600 Manual page 108

Engineering and remote access
3.5 Cyclic and acyclic data
0x0042: OPC UA server (reading/writing)
Data
OPCServerEnabled
OPCUnencrypdedAccessEnable
OPCPort
0x0043: NTP client parameters (reading/writing)
Data
NTPServerEnabled
Fill byte(s)
NTPServer1
NTPServer2
NTPServer3
NTPServer4
0x0044: NTP client status parameters (reading)
Data
Last synchronization time
Next synchronization time
0x0045: PROFINETSecurity (reading/writing)
Data
DCPReadonlyIfConnected
Fill byte(s)
108
Description
Activate/deactivate the OPC UA interface of the SITOP UPS1600:
0: disable
•
255: enable
•
Activate/deactivate unencrypted access via the OPC UA interface
of the SITOP UPS1600:
0: disable
•
255: enable
•
Set port for OPC UA interface (1 to 65535)
Description
Activate/deactivate NTP server:
0: disable
•
255: enable
•
-
IP address of NTP server 1
IP address of NTP server 2
IP address of NTP server 3
IP address of NTP server 4
Description
Time that the last synchronization took place
Time of the next planned synchronization
Description
Setting for DCP write protection
-
Data type
Unsigned8
Unsigned8
Unsigned16
Data type
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Unsigned8 from
V2.2
Data type
VisibleString(20)
from V2.2
VisibleString(20)
from V2.2
Data type
Unsigned8 from
V2.2
Unsigned8 from
V2.2
SITOP UPS1600 / UPS1100
Manual, 04.2017, A5E37775406-8-76