Description, Device Design, Dimension Drawing; Device Description - Siemens SITOP Series Operating Instructions Manual

Description, device design, dimension drawing

2.1

Device description

SITOP PSU8200 1ph is a primary-clocked power supply for connection to a 1-phase AC line
supply. An electronically regulated DC voltage that can be set via a potentiometer is
available at the output of the device. The output of the device is isolated, no-load proof and
short-circuit proof. The LED displays indicate the operating state. The operating state of the
device can be processed via the signaling contact. The device can be switched ON/OFF
remotely using a remote contact.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Figure 2-1
SITOP PSU8200 1ph
Operating Instructions, 06.2014, C98130-A7633-A1-2-7629
Line input
DC output
Potentiometer 24...28.8 V
Pilot lamps (24 V OK, OVERLOAD, SHUTDOWN)
Signaling contact, remote contact
A/B selector switch
Natural convection
DIN rail slider
Clearance above/below
Design (example: 6EP3334-8SB00-0AY0)
2
9