Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 240

■When a station with no network number nor station number setting is selected
(1)
No. Description
(1) Sets a station number for a slave station to which a station number has not been set.
This button is displayed only when a slave station meeting all the following conditions has been selected in "Network Status".
• The slave station supports station number setting from the master station.
• A station number has not been set to the slave station.
When a station set in "Network Configuration Settings" of "Basic Settings" is added, the external device connected to the slave station outputs
data input from the master station, simultaneously with configuration of the station number setting. Therefore, set the CPU module to STOP or
check that outputs from the external device will not cause a problem beforehand.
*1 For how to clear the station number set for a slave station in the CC-Link IE Field Network diagnostics, refer to the manuals for modules
used on slave stations.
■When a remote device station is selected
No. Description
(1) Displays the information of the extension module connected to the remote device station.
4 TROUBLESHOOTING
238
4.3 Checking the Network Status
*1
(1)