4.
Click the [OK] button to add a module label of the RJ71GF11-T2.
5.
Set the network topology in the following item.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(LR)] [Basic Settings] [Network
Topology]
6.
Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(LR)] [Basic Settings] [Network
Configuration Settings]
7.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2(LR)] [Basic Settings] [Refresh
Settings]
1 FUNCTIONS
1.7 Redundant System Function
1
105