Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 150

2.
Click the [OK] button to finish the interlink transmission settings.
Item
Setting Method
Transfer Source Module
Transfer Destination Module
RX/LB Source
LB/RY
Destination
RWr/LW Source
LW/RWw
Destination
*1 The ranges can be set for the master station and submaster station.
Link devices set for "Source" can be overlapped. Doing so will allow transfer of the same link devices to
multiple network modules.
2 PARAMETER SETTINGS
148
2.4 Application Settings
Description
Right-click in the "Interlink Transmission Parameters" window and select a link device
setting method from the "Setting Method" menu.
• Start/End: Enter the start and end numbers of link devices.
• Points/Start: Enter the points and start numbers of link devices.
Select the combination of transfer source and target modules.
Enter the link device range of the transfer source and destination modules. Up to 64
ranges can be set. RX and RY points can be assigned in increments of 16 (Start:
0H, End: FH).
When the transfer source is
*1
a master/local module
*1
Master/local module Network module Network module
Start
No.1
RX LB
End
Start
No.2
LB
RX
End
Start
No.64
LB
RX
End
Enter the link device range of the transfer source and destination modules. Up to 64
ranges can be set. RWr and RWw points can be assigned in increments of 4.
When the transfer source is
*1
a master/local module
*1
Master/local module Network module Network module
Start
No.1
RWr LW
End
Start
No.2
LW
RWr
End
Start
No.64
LW
RWr
End
When the transfer target is
*1
a master/local module
Master/local module
Start Start
No.1
LB
End End
Start Start
No.2
LB
End End
Start Start
No.64
LB
End End
When the transfer target is
a master/local module
Master/local module
Start Start
No.1
LW RWw
End End
Start Start
No.2
RWw
LW
End End
Start Start
No.64
RWw
LW
End End
Setting range
• Start/End
• Points/Start
(Default: Start/End)
The setting varies
depending on the set
module.
RX: 0H to 3FFFH
RY: 0H to 3FFFH
(Default: Blank)
*1
Start
RY
End
Start
RY
End
Start
RY
End
RWr: 0H to 1FFFH
RWw: 0H to 1FFFH
(Default: Blank)
*1
*1
Start
End
Start
End
Start
End