Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 227

■When a setting other than "No Specification" is specified in "Other Station Setting" on the
"Specify Connection Destination Connection" window
: Diagnosed : Diagnosed with restrictions : Not diagnosed
Item
(1) Network map and error status
Cable disconnection and
disconnected station
(2) Status of the selected station
and the error definition
Station number setting of the
slave station
(3) Communication Test
IP Communication Test
Cable Test
Link Start/Stop
(4) Reserved Station Function
Enable
Enable/Disable Ignore Station
Errors
(5) Remote Operation
*1 When the own station operates as a submaster operating station, the function cannot be executed.
When starting the CC-Link IE Field Network diagnostics with a setting other than "No Specification" in "Other
Station Setting" on the "Specify Connection Destination Connection" window, use the engineering tool of the
version 1.035M or later.
The engineering tool is
connected to:
Master station, Local station
submaster
station
 
 
 
*1
 
 
 
 
 
 
 
 
Restrictions

This item is not displayed when the
selected module does not support
"Selected Station Communication
Status Monitor" of the engineering tool.







When the selected station is other than
MELSEC iQ-R series, this function
cannot be executed.
4.3 Checking the Network Status
Reference
Page 230 Diagnostics window






Page 250 Remote Operation
4 TROUBLESHOOTING
225
4