Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 212

16.
Set "To Use or Not to Use the Safety Communication Setting" to "Use".
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(LR)]  [Application Settings]  [Safety
Communication Setting]  [To Use or Not to Use the Safety Communication Setting]
17.
Select "Local Network" from "Communication Destination" in "Safety Communication Setting" window and display the
"Select the target module for the Safety Communication Setting" window.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(LR)]  [Application Settings]  [Safety
Communication Setting]  [Safety Communication Setting]
18.
Click the [Import Setting] button to import the project of the remote head module.
19.
Select the checkbox of the target module for the safety communication setting, and click the [Add] button.
20.
Set the safety communication setting of the added module in the "Safety Communication Setting" window.
3 PROGRAMMING
210
3.5 Communication Example of Safety Communication Function Used in a Redundant Line