Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 99

7.
Set the network configuration as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(MR)]  [Basic Settings]  [Network
Configuration Settings]
8.
Set the refresh settings as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2(MR)]  [Basic Settings]  [Refresh
Settings]
9.
Set the redundant function module of the own system as the system A in the "System A/B Setting" window, and reset the
CPU modules of both systems or power off and on the both systems.
[Online]  [Redundant PLC Operation]  [System A/B Setting]
1 FUNCTIONS
1.7 Redundant System Function
1
97