4.
Click the [OK] button to add the module labels of the master/local module.
5.
Set the items in "Required Settings" as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Required Settings]
6.
Set the network configuration as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
7.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Refresh Settings]
3 PROGRAMMING
162
3.2 Communication Example Using the Submaster Function