Setting In The Submaster Station - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Setting in the submaster station

Connect the engineering tool to the CPU module on the submaster station and set parameters.
Master station (station No.0)
1.
Set the CPU module and add the module labels of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 161 Setting in the master station)
2.
Set the master/local module as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
3.
Add the module labels of the master/local module. The addition method of the module label is the same as that of the
master station. ( Page 161 Setting in the master station)
4.
Set the items in "Required Settings" as follows. Set the same value as that of the master station in "Network No.".
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Required Settings]
Do not set the same station number as that of the master station and other slave stations.
5.
Set the refresh parameters. Set the same refresh parameters as those set for the master station. ( Page 161 Setting
in the master station)
Local station (station No.1)
Setting
Submaster station (station No.2)
3.2 Communication Example Using the Submaster Function
3 PROGRAMMING
165
3