How To Work With The Hi-Tip; Plus; Recognized Objects - Smiths detection HI-SCAN 5170-A User Manual

Conventional x-ray inspection units hi-scan with hitrax electronics
Table of Contents

Advertisement

How to work with the HI-TIP

By means of the HI-TIP systems, complete X-ray images
of fictional baggage items containing threat objects are
automatically projected, at arbitrary intervals, among the
images of real baggage items. Equally, single threat ob-
jects of different kinds are automatically projected on the
real X-ray images of scanned baggage items. You do not
notice the projection process.
 Your task is to detect dangerous or suspect objects and mark them with
 When the conveyors are running, the time you need to evaluate the image and make a decision is limited
to a few seconds (range 1 to 10 s.). If you need more time, stop the conveyors. Usually, the time is auto-
matically extended then (range 0 to 45 s.).

Recognized objects

If you have recognized a suspect object and marked it with
one of the following messages is displayed on the screen.
A
Warning!
Units with newer software* may be set in a way that the conveyors will only be stopped and a mes-
sage will only appear if the suspect object has been projected by means of the TIP system, i.e. if it is
not a real object! If no message appears when actuating
have detected a real, suspect object which has to be rechecked!
Message 1
One fictional threat object was projected on the image of
a real baggage item by the TIP system. It is now provided
with a black/yellow frame and will be deleted afterwards.
A
Warning!
In any case check if the framed object is actually
the object you recognized!
 Delete the message with
95587412 01/01/09 © Smiths Heimann

PLUS

* and aTIP* system*
r
.
How to work with the HI-TIPPLUS* and aTIP* system*
I
Statistics referring to every user and his
activities on the X-ray unit are created.
From such reports higher level users
can read how many times projected ob-
jects and images have been recognized
and how many of them have been
missed by the individual users.
H
, the conveyors are stopped automatically and
H
and if the conveyors do not stop, you
1060
H
.
1050
1-73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents