Smiths detection HI-SCAN 5170-A User Manual page 45

If this window appears, a login will only be possible for you by
means of the card. Only users with higher authorization level
are allowed to log in by entering their code via the keyboard
(see following paragraph).
If this window appears, a login will be possible with the card as
well as with entering the code via the keyboard (see following
paragraph).
 To log in with the ISIS card, just insert your card into
the card reader as illustrated. Now you have logged in.
Your card remains in the card reader during your work.
☐
The indicator or the indicator located next to the
card reader (on older keyboards) lights up perman-
ently as long as the card is correctly inserted.
I
If the indicator flashes after inserting a card,
or if it does not light up at all, the card has
either been wrongly inserted or it is not read-
able.
S
Attention!
When using the X-ray unit in the following course, statistics and reports referring to your work will
be recorded. It is therefore important to you to log out by withdrawing your card when you leave
the X-ray unit or when you pass it over to a colleague!
 On units equipped with newer software the acknowledg-
ment illustrated beside is displayed if provided like that by
higher access level users. After a short delay the message
will automatically disappear; you may also delete it with
r
.
95587412 01/01/09 © Smiths Heimann
How to start and terminate your work
690
1-35