The Default Image Display; The Zoom Settings; The Screen Saver - Smiths detection HI-SCAN 5170-A User Manual

How to set operating options

The default image display

The default image display is the image display that appears upon switching on and after actuating
 Activate menu item Default image display to have a selection list displayed.
 Select the desired function and leave the list with
S
Attention!
If you change the default image display, you should assign the HI-MAT
on X-ray units without HI-MAT
wise, these image displays cannot be used any more during baggage inspections!
Image displays of options the unit is not equipped with, must not be selected!

The zoom settings

In the Image settings menu you can set the Maximum zoom factor and, in addition, enable/disable the Con-
tinuous zoom and the Zoom interpolation on newer units.
 Select the corresponding item and set the desired value or enable/disable the corresponding function.
r
 Exit the menu with

The screen saver

To achieve longer life of the monitor screen, you can activate the screen saver. After the set time the screen
will be switched to dark, if the X-ray unit is not used.
 In the Image settings select the item Screen saver and
set the time.
r
 Exit the menu with
2-32
PLUS
system*, one of the HI-CAT image functions to a priority key. Other-
.
.
r
.
I
With setting 0 the screen saver is deac-
tivated.
V
PLUS
image* display function or,
95587413 01/01/09 © Smiths Heimann
.
1490