How To Test Indicators And Audible Alarm; How To Log Out; Logout Via Isis Card - Smiths detection HI-SCAN 5170-A User Manual

How to start and terminate your work

How to test indicators and audible alarm

You can test the indicators and the audible alarm of the
X-ray unit.
 Use the navigator to move to item Diagnosis in the Main menu
and activate this item. The menu illustrated beside is displayed.
 Go to item Indicator test and activate it.
 Use the navigator to activate the indicators on the key-
board, the radiation indicators and the audible alarm.
After about 1 second the radiation indicators are deac-
tivated again. As soon as you release the navigator the
other indicators and the audible alarm will be deactiv-
ated as well.

How to log out

To protect the operators from overtiredness, newer soft-
ware allows to request the operator to log out after a pre-
defined time. Higher authorization users can activate this
function and set the time interval.
 Acknowledge the message and then log out (see below).

Logout via ISIS card*

Just withdraw your ISIS card from the card reader and you have logged out.
1-40
I
In units with newer software, the access
to this function can be disabled by users
with higher authorisation.
95587412 01/01/09 © Smiths Heimann