Edit Category; Delete Category; How To Import A Threat Image Library - Smiths detection HI-SCAN 5170-A User Manual

How to configure the HI-TIPPLUS* and the aTIP* system

Edit category

 Select the category with the navigator.
 Actuate key [2 def]. The menu op-
posite is displayed.
The entries correspond to those of the
menu for the entries of a new category
(see above) with one difference: when
renaming the category name special
characters are also accepted.

Delete category

 Select the category with the navigator.
 Actuate key [3 ghi].

How to import a threat image library*

 Depending on the data material available, you have to
decide first which threat image library has to be modi-
PLUS
fied (HI-TIP or aTIP) and whether you want to re-
place or upgrade the existing library. Therefore, check
the data carriers to see to which TIP system the library
belongs and if it is a complete library or an upgrade. Also check if the library is intended for the unit type.
 Then insert the first disk, the first DVD* or the first CD
or connect the first USB memory.
 Go to the menu item Import threat image library or Import adaptive threat image library with the navigator
and activate this menu item. The window illustrated is displayed.
 If the complete library is to be replaced, press key [1 abc]. If you acknowledge the following question with
r
, the existing library will be deleted first, i.e. all threat image categories and threat images created
so far will be completely deleted.
2-54
I
For information on the creation of threat
image libraries on data carriers, please
see below (F 2-73pp).
S
Attention!
Ensure that no other data carrier is in-
serted or connected! 1630
95587413 01/01/09 © Smiths Heimann