How to set the language
You can select the language for screen messages, menus and windows as follows:
Use the navigator to go to menu item Language and activate this
menu item. The menu opposite is displayed.
Select one of the available languages and exit the menu with
r
.
The language will not be switched over until you have left all
menus.
How to set date, time and time zone*
I
If the X-ray unit is connected to a central computer (airport server, Matrix Server etc.) via network,
the date, time and time zone* set on that computer will be cyclically overtaken, i.e. modifications you
make will be overwritten after a short delay.
Use the navigator to go to menu item Date & time, time zone* and activate
this menu item. The menu opposite is displayed.
I
Units with older software only have the Date & time menu (see
below).
First select the Time zone* menu item.
95587413 01/01/09 © Smiths Heimann
How to set operating options
2-29