Smiths detection HI-SCAN 5170-A User Manual page 35

5
display of the currently active operating mode of the HI-SCAN X-ray unit
Display
−−
auto
IMS
(IMS)
IMS&auto
IMS&REV
OTS
(OTS)
OTS&auto
OTS&REV
REVIEW
REV&auto
6
display of date and time
7
display of conveying directions
In this direction scanning procedures can be carried out in the one-way mode (F 1-47).
Press the corresponding key
veyors press
In this direction scanning procedures can
be carried out in the one-way mode
(F 1-47). The corresponding key
n
must be kept depressed during the
inspection.
I
If the color of an arrow changes into red in the one-way mode (F 1-47), this means that
the conveyor's run has been interrupted, or can still not be initiated despite pushing the
conveyor start key. This may occur if safety switches* at the conveyor ends and/or the tunnel
entrances and exits (conveyor end or oversize detectors* - F 1-54) have detected that baggage
items have got stuck, or, if the X-ray inspection unit is integrated into a baggage handling sys-
tem or line with the feed and discharge conveyors being out of service or occupied with bag-
gage.
95587412 01/01/09 © Smiths Heimann
Function
normal
markings set by the user and markings of one or more automatic detection functions
(X-ACT*, radioactivity detector*, HDA* and HI-SPOT*) are inserted
images stored in the IMS Image Store System* are recalled
IMS recall stopped temporarily
IMS recall with markings of automatic detection functions
recalled IMS images are reviewed
OTS training session is in progress
OTS training session stopped temporarily
OTS training session is in progress with markings of the automatic detection functions
preceding OTS X-ray images are reviewed
preceding X-ray images are reviewed
review of images with markings of automatic detection functions
m
1
.
n
or shortly to start the conveyors. To stop the con-
S
Attention!
Units with newer software* can also be
m
or
set so as to stop the conveyors only
after up to 3 seconds after the key is re-
leased! Immediate conveyor stop is pos-
sible with key
Here you find controls and indicators
1
!
F
1-50& -57
1-82
1-82
1-82
1-82
1-77
1-77
1-77
1-77
1-48, -49, -77
& -89
1-48, -49, -77
& -89
510
1-25