How to start and terminate your work
After your acknowledgment with
are activated in reverse direction.
S
Attention!
Ensure that no baggage items fall down! The
conveyors can be stopped with
If you have stopped the conveyors with
illustrated above is displayed again. The conveyors will
only stop automatically until the tunnel has been prop-
erly cleared.
Controlled clearing
The shown window will appear.
Select the desired Conveyor direction and start the conveyors with
the navigator or with
A
Warning!
If you want to make sure objects which may have been left
in the inspection tunnel do not pass the unit without being
scanned, start the conveyors in reverse direction!
S
Attention!
Units with newer software* may be set in a way that the keys
pressed briefly or have to be kept depressed (according to the arrow symbols in the screen indica-
tion field (F 1-25))! In the latter case the unit can also be set so as to stop the conveyors only after
up to 3 seconds after the key is released! An immediate conveyor stop is possible with
Stop the conveyors again with
gage or freight items.
As soon as you have conveyed all items out of the tunnel in the manner described above, leave the window
s
with
.
S
Attention!
If the tunnel is not completely cleared, error messages regarding the light barriers and incom-
plete or missing X-ray images will result during following inspections!
1-38
r
the conveyors
1
!
1
the window
m
n
or
.
1
or in field Stop conveyor using the navigator to allow unloading bag-
I
The X-ray generators are active while
the conveyors are being cleared for an
automatic calibration of the imaging
system and for the detection of baggage
items.
730
I
If a standard HI-SCAN X-ray unit has
only be turned off for a short moment,
for example, because of the pressing of
an emergency stop button, only one bag-
gage item will be reversed and the X-ray
generators will not be activated.
740
n
m
and
either have to be
1
!
95587412 01/01/09 © Smiths Heimann
750
760