How To Work On Reports; How To Activate Feedbacks; How To Display The Object Markings - Smiths detection HI-SCAN 5170-A User Manual

 In the second menu item Additional decision time - threat object you set time the operator is given addi-
tionally to come to a decision after having stopped the image scroll.
 In the third menu item Decision time - combined images
you set the decision time the operator is given to detect
an complete threat image, i.e. the time he has got until
H
he either actuates
 In the last menu item Additional decision time - combined images you set the time a operator is given addi-
tionally to come to a decision after having stopped the image scroll.

How to work on reports

Menu item Reports and data download is referred to below (F 2-75). For a reasonable use of the reports, the
feature Login duty for all users or Login only via ISIS card* must be activated in Login/Logout (F 2-10) and all
users must have their own user IDs and passwords.
 Use the eighth menu item Run statistics to activate/deactivate the generation of statistics.

How to activate feedbacks

 Use menu item Feedback to operators to activate/deactivate feedbacks to the operators.

How to display the object markings

All images of threat objects were recorded with HI-SCAN X-ray units. If at the moment of storing automatic
detection functions like X-ACT*, High Density Alert* or HI-SPOT* were active at these units, the projected
threat objects would be marked accordingly with colored frames or highlighted areas (see first section) and
the markings would be stored, too.
If the HI-SCAN X-ray unit is equipped with one of the auto-
matic detection functions* mentioned above and the func-
tion is activated, you can display the threat objects with
the corresponding markings.
You can perform the corresponding setting in the TIP menu.
 Use the navigator to go to menu item Display object markings and activate or deactivate this function.
95587413 01/01/09 © Smiths Heimann
or stops the image scroll.
How to configure the OTS XTrain system*
S
Attention!
The value for this time should be smal-
ler than the value set for the image
change frequency (F 2-65)! This way, you
prevent the insertion of the complete
threat image from being aborted by a
following basic image!
I
Only those markings will be displayed,
which correspond to the active automat-
ic detection function.
1730
2-71