How To Enable The Network Access - Smiths detection HI-SCAN 5170-A User Manual

How to enable the network access

How to enable the network access
If you enable the external access, authorized users may
access and change data and X-ray images of the X-ray unit
via the connected network*.
 Use the navigator to activate the menu item Network and data transfer
in the Main menu. The menu illustrated is displayed.
 With the navigator activate the menu item External access.
The menu illustrated is displayed.
 Enable the access via the menu function Enable access. The
status display changes into Access enabled.
I
If you leave the menu with
is only possible as long as the menu shows the status message Access enabled.
 With menu function Disable access appearing then you can disable the external access again.
2-88
s
, the access will be blocked again. This way, access to the X-ray unit
I
The data transfer via network is ex-
plained in a separate manual (order no.
95585380).
95587413 01/01/09 © Smiths Heimann