Logout Via Keyboard; How To Switch Off - Smiths detection HI-SCAN 5170-A User Manual

Logout via keyboard

If a colleague takes over the X-ray unit from you, simply check, whether he/she has logged in correctly
(F 1-34). Thus, you are logged out.
If you want to switch off the X-ray unit, you need not carry out a logout procedure either, since you will be
logged out when switching off.
If nobody takes over the X-ray unit, but, if the X-ray unit is not to be switched off either, you have to log out as
follows:
 Use the navigator to activate the first item Login/Logout in the
Main menu. The menu illustrated above appears.
 Direct the navigator to the item Logout and activate it.
 If you have logged in with your ISIS card*, the message illus-
trated appears reminding you of withdrawing your card.
 Afterwards the user ID entry window for the next user
is displayed.

How to switch off

 Leave all menus.
 Ensure that no baggage item is left on the conveyors. If necessary, have the conveyors move left or right
until the inspection tunnel is empty.
 Check, if the recheck of the last baggage or freight item has been finished at the recheck station*.
 Withdraw your ISIS card* from the card reader.
 Then initiate the automatic shutdown cycle of the X-ray unit by turning the key switch to the left to position
O.
 Withdraw the key from the key switch.
95587412 01/01/09 © Smiths Heimann
How to start and terminate your work
I
Until you or any other user has logged
in, all other X-ray unit functions will be
locked up.
1-41